Issues in glazing

While London glazing might be one of our favorite maintenance activities, we cannot possibly ignore the issues glazing process brings about in our windows and doors. Have you ever experienced glazing issues? If not, then you are a lucky person because glazing issues have been seen all over the world!
Networking cracks: if the heat and fire during glazing is not handled with care, it encourages cracks on the glass. The crack is not actually a single one which cannot be ignored, there are hundreds of cracks which are lined together and form a sort-of network. The only solution to such a problem is the change of glass because nothing else can eradicate the cracks from glass.
Shivering of rabbet: although glaziers are very careful while completing the process they have no idea about the slight shivering of the rabbet which might happen. It is hard to point out that the rabbet is shivering a bit and therefore cracks develop on the glass and heat is not evenly distributed. This produces cracked glass and ultimately broken glass from the edges or other points.
Hole production: because heat is being encouraged on the glass, there are a lot of chances that the heat shall create a hole in the glass. The hole is usually created at a point where the glass is very weak and tormented. The glazing enables holes in some areas of the glass which in turn ruin the entire glass.
No matter how much they try, the glaziers are bound to face certain problems while attempting glazing. All they can do is practice harder and make their team bigger. The more people in hand, the bigger will be the helping in terms of holding the rabbet still and encapsulating the glass properly. Ultimately, the result would be something we want.