Fit a Window (Basic Guide)

To fit your own windows will require, time, patience and quite hard work. The key to success is good preparation, so get all the measurements correct (you can never measure enough). Learn and memorise the names of the various parts of the windows, and what they are for and where they fit. London Glazing can offer advice on all thing glass. If this is the first project you have undertaken, then it is advisable that you begin with something easy, maybe a small downstairs window. however once you have gained experience and your confidence is high you’ll be able to tackle bigger jobs. There is always the back up of callin in a professional service to install for you. Always keep their number handy just in case. Below is a guide to installing a window assuming that the old one is now removed:

This is a basic guide, however it is designed show that fitting your own double glazing need not be difficult.

• Place the double glazed panel moulds into place. London Glaziers use qualified tradesmen for all types of work.
• This may need some heavy treatment. Align the draft proofing strips and begin screwing in the catches and hinges. Fit the glass windowpanes into position.
• Make sure that you consult the planning regulations as permission might be required, because as of April 2002, building regulations have been applied to replacement glazing. Under these regulations, external windows and doors are classed as “controlled fittings” so there are certain standards that will need to be satisfied in order for planning permission to be granted. If in doubt, it would be wise to speak to your local authority or a registered installer. With a little planning, you can save a lot of time and money, and those of you who are confident should have little difficulty installing your own double glazing.